This shows you the differences between two versions of the page.

tips_info:cabling:tools [2011/02/18 11:17]
stjohnla [at] virginia [dot] edu
tips_info:cabling:tools [2011/03/29 12:14] (current)
sdg6h [at] Virginia [dot] EDU [Tool tips] Added info on available connectors in stock room and what die sets we have
Line 1: Line 1:
 {{indexmenu>:tips_info|js tsort}} {{indexmenu>:tips_info|js tsort}}
 ====== Tool tips ====== ====== Tool tips ======
 +The following tips relate to cable assembly and crimping.
 +===== BNC Coaxial Connectors =====
 +We have the following BNC coaxial crimp connectors in the stock room:
 +  - Kings [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SD755-114-9.pdf|755-114-9]] for RG-58
 +      * Kings recommends to use die [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SDKTH-2001.pdf|KTH-2001]], but we have in the electronics shop [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SDKTH-2061.pdf|KTH-2061]]
 +      * The difference b/w the dies is that the KTH-2061 is 0.1" wider and this extra width has a bigger "diameter" for the outer hex crimp.  So it appears to be possible to use a KTH-2061 with a 755-114-9 if care is taken
 +      * The draw back is that the outer hex crimp will not be completely crimped near the back of the BNC head
 +      * Cabling instructions for this connector: [[http://www.winchesterelectronics.com/CableProcedures/CP-465.pdf|CP-465]]
 +      * Cabling instructions for the connector made for this die (KTH-2061): [[http://www.winchesterelectronics.com/CableProcedures/CP-401.pdf|CP-401]]
 +  - Amphenol [[http://www.amphenolrf.com/record.asp?N=0&sid=4D9121006E28BCFF&R=031-71008|31-71008]] for RG-59
 +    * Amphenol recommended die: [[http://drawings.amphenolrf.com/Tools/227-1221-X.pdf|227-1221-13]]
 +    * In the electronics shop is a Kings [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SDKTH-2062.pdf|KTH-2062]] die which may work, once again if care is taken.  The difference between the die sets is similiar as the difference with the above RG-58 die sets
 +    * Amphenol [[http://www.amphenolrf.com/pdf/307.pdf|assembly instructions]] for this connector
 +    * Amphenol [[http://www.amphenolrf.com/products/AssemblyInstructions/bnc.pdf|general BNC assembly instructions]]
 +  - Kings [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SD755-129-9.pdf|755-129-9]] for RG-174
 +    * Kings recommends to use die [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SDKTH-2032.pdf|KTH-2032]], but in the electronics shop is the [[http://www.winchesterelectronics.com/CatalogSalesDrawings/SDKTH-2082.pdf|KTH-2082]]
 +    * Appears to be able to use KTH-2082 if care is taken with similar caveats as above for RG-58 and RG-59
 +    * Cabling instruction for this connector: [[http://www.winchesterelectronics.com/CableProcedures/CP-406.pdf|CP-406]]
 +    * Cannot find cabling instructions for the connector made for this die (KTH-2082)
tips_info/cabling/tools.txt · Last modified: 2011/03/29 12:14 by sdg6h [at] Virginia [dot] EDU
Recent changes RSS feed Creative Commons License Valid XHTML 1.0 Valid CSS Driven by DokuWiki
Drupal Garland Theme for Dokuwiki